Flexible LED Strip is ideal for indoor lighting. New lighting system, easy installation, friendly and energy efficient. Easy installation and connection it is cut with scissors into segments of 10 cm to adapt the length and has 3M adhesive on the bottom that adheres to the surface.
Strip of 30 LEDs per metror.
12 to 13 lumens per LED.
Type RGB LEDs which produce the full range of colors with the controller appropriate LED strip.
Consumption: 7.2 W per meter.
Voltage of operation: 12 VDC.
Cut every 3 LEDs section (sections 10 cm).
Presented in coil of 10 m.
PCB width of 10 mm.
Cord has 20 cm strip welded to the LED in both extremos. Requires 4-wire power cord (R, G, B and COM).
Requires power supply 12 VDC our references such as VF1x, or FA1x FA2x.
You can solder the power wires to the PCB tracks LED strip or use our range of connectors or VF5x VF6x.
Optionally you can use a light dimmer (dimmer) or RGB LED strips drivers as ours references VF7x, or VF8x VF9x.
Maximum length of a segment of 10 m. You can use different segments connected to the same source or use realimentadores alimetación.
Strip 505 SMD chips based on 3 lights and 50x50 mm size.