Electronic LED sign 120x7 DisplayMatic of red and green

Illuminated sign DisplayMatic brand electronic technology based on LEDs. LED illuminated signs are the ideal way to advertise any post at any shop, industry, vehicle, office, etc.. They can also be used as an economical alternative to expensive dynamic and static labels stores, because the message can be varied as needed. Supplied with metal tabs that allow you to set the label to the wall or ceiling and change its direction for better visibility. The programming of the label is done through the included remote or through RS232 serial port.

Specs

• Brand neon sign: DisplayMatic.
• Model of a single line of text and/or graphic effects.
• Screen Size of LEDs: 924 x 52 mm.
• Shell size of the banner: 964 x 96 x 34 mm.
• Label weight: 1,725 g.
• Viewer consists of an array of 120 LEDs x 7 (H x V).
• Size of 7.62 mm LED.
• LED array technology (dot matrix) standard brightness normal light environments.
• Red LED and green standard brightness designed for installation in indoor lighting conditions, not intended for use with sunlight.
• The combination of red and green tricolor effect gets a red, green and amber.
• LED technology for low power and long life.
• Powered with 5 VDC at 2 A. Power is supplied from 220 VAC to 5 VDC (3 A).
• Optionally you can purchase a 12 VDC or 24 VDC for installation in a vehicle (eg bus). See our references LE9x.
• It has serial interface RJ11 female connector. It provides 8 m cable DB9 female to RJ11 type male. This allows connection to a computer to program it. It provides a very simple utility for programming from Windows.
• The viewer has IR receiver (infrared) remote control and programming of it directly and without using a computer.
• Can be programmed remotely via USB, LAN, GSM (SMS), etc.., Using the appropriate adapters connected to the RS232 serial port of the display. The possibilities are many as needed.
• It has predefined character set even if the user can design their own characters or graphics.