Bulletin board or board illuminated by LEDs for all types of businesses: hotels, bars, restaurants, parks, schools, hospitals and shops. Ultimately where you want to advertise in a showy, elegant and fast. The slate is illuminated by 7-color LEDs that allow different lighting that makes the colors change, obtaining very attractive combination. You can program different sets of lights changing.
Anodized aluminum frame, black, 25 mm wide and 15 mm deep.
Surface made of PMMA (polymethylmethacrylate) with high impact resistance (10 to 20 times the strength of the glass), transparency of 93% and intenperie resistant and UV (no appreciable aging in 10 years of outdoor exposure .)
Fund opaque black slate, as if it were a traditional blackboard.
Total size 70 x 60 x 1.5 cm and net weight of 3.30 kg
Frame with LEDs that illuminate uniformly the written with special markers of different colors. With the LED lighting achieves a similar effect as the neon lights and phosphorescent effects.
Electronics that allows 7 different colors of light. Operational mode allows the change of color or single color. Change color mode allows multi-speed, operational and lighting effects. Has a control with the necessary controls.
The texts and pictures are painted on the board with a special pen LED boards. By default it provides a fine-tipped pen white. The white marker accurately reflects the color of the LEDs on the board, so if the LED is red, white changing to red. If the LED light is white, white pen blank is also shown.
The erasure is performed easily. Just to wipe the surface dry to remove the ads.
Unlike traditional boards, these models are in the dark without being enlightened externamiente.
Easy to carry and lightweight for use anywhere.
More than 50,000 hours LED lamp life.
Energy efficient LED lights because they have a very low power consumption.
It has two rings and a ribbon to hang the board on the wall.
Ability to acquire markers of stroke 4.5 mm (reference LW2x) or markers of stroke 10 mm (reference LW3x). Possibility to buy other accessories like special comp (Reference LW66) or a tripod to board LEDs (part LW51).
If it is not possible to have an outlet near the LED board, you can use a small portable battery (reference LW61) up to 15 hours of battery life).
Slate 70 x 60 x 1.5 cm with a black background.
Power Supply 220 VAC to 15 VDC at 1000 mA.
Electronic cable to program the LED lights.
Strap as a picture on the wall.
Thick white pen tip (diameter 10 mm) as our reference LW31.