Alarm GSM 4 band

Alarm system for home or business that can be extended to all types of wireless sensors. Lets be connected to the GSM mobile network so that when the alarm makes calls to phones predefined by the user to alert the potential intrusion or alarm. Economic system in which companies that sell alarm center services are not needed, eliminating monthly fees to make simple intermediaries between the alarm and the client. The control panel can be your own mobile phone, which is ultimately where you end up calling a central alarm company. There are mobile operators that do not charge overhead if not make any calls, so it is possible to have contracted a GSM SIM and have no overhead, except the calls.

Specs

• Central unit of small size: 168 x 110 x 28 mm. GSM antenna features swivel and 9 status LEDs (zone 1 to zone 8 and power).
• Quad-band GSM model: 850, 900, 1800 and 1900 MHz
• The central unit has no keypad and alarm programming is carried out via SMS.
• Anti-interference function and anti-decoding the remote control.
• Allows programming up to 8 zones based on wireless sensors and wiring. The zones can golde more than one sensor or accessory set with a maximum of 160 wireless sensors installed in total. Each zone can have its own configuration parameters related to assembling, disassembling, delayed detection, and so on.
• Includes a wireless sensor magnetic sensor (such as reference LB12), a wireless sensor volume (the reference LB02), two radio frequency remotes, a siren (like part LB21), the power supply unit central and speaker-mic.
• Lets you program up to 6 phone numbers to the alarm calls to report the activation of a sensor. It is also possible to send SMS to 160 carcteres the programmed numbers. Calls or SMS are done according to the priority order of each number.
• Supports recording a voice message up to 10 seconds long. This message will play when the central phone call predefined. It may contain a message like: Alarm on Pine Street, 1.
• Allows remote access via the telephone line to run most typical commands: armed, unarmed, to hear the ambient sound, activating the siren voice communication two-way relay activation, deactivation of the relay, and so on.
• Allows remote monitoring of the installation of the alarm. This feature allows you to hear ambient sound. Allows us to establish a bi-directional hands-free, so it is possible two-way telephone communication environment.
• Allows the installation of more sensors and wireless sensors. The installation and coding of new sensors is quick and easy as the central unit must simply recognize the new sensors. Compatible with accessories LB0x, LB1x, LB2x, LB3x, LB4x, LB5x, LB6x, LB7x, LB8x and LB9x.
• Programming is done by sending SMS messages to alert a mobile phone with password protection.
• The supplied remote control with 4 buttons with the following functions: arming, part set (night), dismantling and emergency.
• In addition to alarm allows the programming of an emergency action plan when you press the emergency button on the remote or install a special button (Ref. LB34). This feature is ideal for the care of older people.
• Notification function circuit or sensor failure.
• Includes internal backup battery 12 hours (approx.), so that the alarm will continue operating even if power cuts or sabotage.
• All operating local or remote configuration, are protected by password access.
• It has 10 terminals on the back for connecting the wireless sensor wiring, speaker-mic environment and a relay (L1 to L4, GND, +12 V, SPK +, SPK-RL and RL +-).
• Allows connection of external electrical devices controlled from the alarm itself. This enables the alarm for remote activation of an electrical device external contactor, relay, etc..
• Easy to use and install. Any home or business can have one installed.
• The manuals are available in English.